Manual rising arm barriers provide a low maintenance, cost-effective way of manually controlling access to unauthorised areas. Ideally suited for protecting car parks and other entrances. The barriers are operated manually and are counter balanced to ensure easy lifting and lowering of the arm. These products are ideal for permanently manned entrances or where access is restricted at particular times.

Barriers can be up to 9 meters in length depending upon the model, and can be configured in a ‘meeting’ pairs for larger road widths. A straining wire prevents the pole arm bowing on models over 6 meters in length.

Constructed from laser cut mild steel with a strong but lightweight aluminium pole arm counterbalanced by supporting weights with the option to be galvanised before powder coating for greater protection against corrosion.

The barriers are powder coated in red as standard, but are also available in a full range of RAL colours. The barrier may be locked in both the raised and lowered positions by the users own padlock.

Showing all 4 results

car park barrierscar park barriers

Heavy duty barrier

The Heavy duty raise arm barrier spans an area of up to 9.0 metres. The pivot assembly is made of steel box section, this pivots on two heavy duty stainless steel bearing blocks.

Aluminium arm, finished in either alternate red and white or alternate yellow and black vinyl hatching as standard (other colours available).The design of the barrier also comes with a locking mechanism allowing you to fix the barrier in the raised and lowered position prior to applying the padlock. A counter balanced fish tail weight, is fine tuned for ease of operation. Dual barriers are available with a central locking mechanism to suit wider spans. This barrier unit comes complete with a lockable end rest, padlock and keys as standard. M16 anchor shield bolts are also included.

Standard colours: Red/white or yellow/black.

Specification:

Counter balanced manual raise arm barrier

Maximum boom length:

Up to 9.0 meters

Boom diameter:

101 mm oval section pole

Finish:

Polyester powder coated in a single RAL colour, alternate vinyl bands to pole arm

Dimensions:

120 mm square

Comes complete with:-

  • Lockable end post
  • Padlock
  • Anchor shield bolts
  • Lifting handle

Optional extras:-

Bottom skirting

Stop/no entry signs

Pogo tip support

Lux heavy duty barrier by Bollard Street, UK Street Furniture SpecialistsLux heavy duty barrier by Bollard Street, UK Street Furniture Specialists

Lux Heavy duty barrier

The ‘Lux’ heavy duty barrier is a superior quality heavy duty manual barrier which spans roads up to 9.0 metres. The pivot assembly is made of laser cut mild steel sections with a robust 150 mm x 100 mm support post.

A 101 mm dia. aluminium pole arm, finished in either alternate red and white or alternate yellow and black vinyl hatching as standard (other colours available).The design of the barrier also comes with a locking mechanism allowing you to fix the barrier in the raised and lowered position prior to applying the padlock. A counter balanced fish tail weight, is ‘fine-tuned’ and weighted perfectly for ease of operation. Dual barriers are available with a central locking mechanism to suit wider spans. This barrier unit comes complete with a lockable end rest, padlock and keys as standard. M16 anchor shield bolts are also included.

Standard colours: Red/white or yellow/black.

Specification:

Counter balanced manual raise arm barrier

Maximum boom length:

Up to 9.0 meters

Boom diameter:

101 mm round section aluminum pole

Finish:

Polyester powder coated in a single RAL colour, alternate vinyl bands to pole arm

Dimensions:

150 mm x 100 mm rectangular support post

Comes complete with:-

  • Lockable end post
  • Padlock
  • Anchor shield bolts
  • Lifting handle

Optional extras:-

Bottom skirting

Stop/no entry signs

Pogo tip support

Standard duty barrier by Bollard Street, UK Street Furniture SpecialistsStandard duty barrier by Bollard Street, UK Street Furniture Specialists

Standard Duty Barrier

The standard duty manual raise arm barrier is a low maintenance, cost effective way of manually controlling access to unauthorised areas.

The barrier spans an area of up to 7.0 metres. The pivot assembly is made of steel box section, the zinc plated shaft pivots on two heavy-duty stainless steel bearing blocks. The design of the barrier incorporates a locking mechanism, allowing you to fix the barrier in the raised or lowered position prior to applying the padlock.  A counter balanced fish tail weight, is fine tuned for ease of operation. This barrier unit comes complete with a lockable end rest, padlock and keys as standard. M16 anchor shield bolts are also included.

Aluminium arm, finished in either alternate red and white or alternate yellow and black vinyl hatching as standard (other colours available).

Standard colours: Red/white or yellow/black.

Specification:

Counter balanced manual raise arm barrier

Maximum boom length:

3 up to 7.0 meters

Boom diameter:

76 mm oval section pole

Finish:

Polyester powder coated in a single RAL colour, alternate vinyl bands to pole arm

Dimensions:

120 mm square

Comes complete with:-

  • Lockable end post
  • Padlock
  • Anchor shield bolts
  • Lifting handle

Optional extras:-

Bottom skirting

Stop/no entry signs

Pogo tip support

Telescopic boom barrier by Bollard Street, UK Street Furniture SpecialistsTelescopic boom barrier by Bollard Street, UK Street Furniture Specialists

Telescopic boom barrier

A manual rising arm barrier featuring an innovative adjustable telescopic pole (boom arm). This barrier is suitable for most road widths and is adjustable for road widths from 3050 mm up to 6400 mm.

The 80 mm x 80mm aluminum boom barrier elongated by a 70 mm x 70 mm aluminum shaft. Width ranging from 3200 to 6550mm (distance between rotation axis and the end of the barrier) with a width between the posts from 3050 to 6400 mm.

Rotation on a stainless-steel shaft on ball bearings.

Hidden counterweight set on top of boom.

Can be locked in the upright position (on the main post) or downwards position (on the rest post) by the pin and padlock supplied.

Complete with mild steel rest post.

White lacquered finish with red reflective strips. Fixed to adjustable base plate with kit of U-shaped bolt.

Fixed to on a base plate with installation kit supplied.

Options:-

Locking with an 11 mm triangle key.